Archive for the ‘857D in Dodge Ram’ Category

…almost there…

Inspired by the success I had on field day using some (most) of n0oqa’s gear, I’ve made some purchases to get my mobile-deploy-able setup going.

First, I decided to go with a hitch mount push-up mast. Using Larry’s setup really sold me on the Max-Gain Systems fiberglass mast. I ordered the MK-4 Standard from here: http://www.mgs4u.com/fiberglass-push-up-mast.htm

Also, after seeing what it really means to have a tuner “talking to” the radio, I purchased a Yaesu FC-40.

My plans are to setup the FC-40 with the ladder line and deploy-able antenna as well as the coax and CAT lines to the radio, then stage all that in the bed of the truck. I have a covered bed and will have everything staged in a waterproof bag.

This will leave the CAT port of the radio for my BlueCat device. Since I’m primarily on VHF when on the road, this will let me work repeaters easily wherever I’m at.

When I’m somewhere I can park to do some HF work, I’ll get the antenna base mounted in the receiver, put the antenna in, roll out the FC-40/antenna/coax unit, hook up the CAT line and the tuner coax, get the pulley staged on top the mast, push-up the mast, guy-rope the mast, pull up the feedpoint, straighten and anchor the ends of the antenna wires – and I’m on the air.

This will be an inverted V antenna.

If I get a couple fiberglass painter poles, I can guy-rope them at the ends and raise the wire ends a bit. Getting them off the ground even 5 feet will help tremendously since my antenna center will only be about 23 feet off the ground.

Thoughts?

Advice?

…Field Day…

A couple months ago I *finally* installed my Yaesu FT-857D mobile radio in my 2009 Dodge Ram 1500. You can see some info on how I did that here: /wh7da-mobile/

Today, I setup the FT-857D in my Dodge Ram with a friend’s Yaesu FC-40 tuner and a random wire dipole. I made two contacts. One in Oregon and one in Illinois.

This has helped me rethink my strategy for getting a more permanent and easily deploy-able HF setup in the truck. I liked the ease of using the FC-40. I liked using a ladder-line fed dipole. I liked the hitch-mount telescoping mast.

We had a fun time. We didn’t do any formal contesting. We got together, setup our rigs, made some changes, and had some fun.

Here are some links to a few short videos I took:

Connecting the antenna: https://drive.google.com/file/d/0B7RMDG297cFoNlhUV0RoRVJBRXc/view?usp=sharing

The antenna setup: https://drive.google.com/file/d/0B7RMDG297cFoU0hhaEtaX3dkY0U/view?usp=sharing

Trying to break into a pileup to San Diego: https://drive.google.com/file/d/0B7RMDG297cFoZ09QcXhwSUtVYjg/view?usp=sharing

IMAG0540 IMAG0539 IMAG0531 IMAG0513

…wh7da mobile…

So, I’ve had this Yaesu 857D sitting around for almost five years and decided to finally install it in the truck. I wanted a clean install that can easily goes back to the factory look without much fuss. I wanted to minimize the permanent alterations.

I also wanted to use my stock antenna or fit a stock looking 2m antenna where my radio antenna was. The antenna part of the project turned out to be an unsuccessful adventure and I’m now running with a magmount until I tackle that project again.

The radio: Yaesu FT-857D

The truck: 2009 Dodge Ram 1500

Accessories: BlueCat bluetooth CAT port dongle and a West Mountain Radio Rigrunner

As with any radio installation project, first you have to get behind the dash:

Getting behind the dash

Getting behind the dash

We initially pulled the stock radio to get to the antenna so we could see what it tuned up at and determine if there was any way to mess around with using the stock antenna. As you’ll see from the pictures below, it was not a viable option. It tuned up on 103Mhz and was routed with 75 ohm coax. Some options in the future are to pull out the 75 ohm coax and run 50 ohm up to the antenna. I’m also looking at fitting a Larson 2m antenna in the stock antenna base. We’ll see. For now, I’ve put that part of the project on hold in order to get the radio mounted and working.

Does that look like a normal american vehicle antenna connection? Turns out it’s not.

16573640944_5232682e48_k 16573659164_7f518464ce_k

The late model Dodge antenna adapter doesn’t fit my late model Dodge. After digging around in the back room with the radio install guys at Best Buy, we found that the correct adapter for my late model Dodge truck was a VW/BMW/European adapter cable. Figures.

16575909023_96eecaf230_k 17008672300_ced004683e_k

When we checked the antenna, it tuned up on 103, which is not what I need – but exactly what I was expecting. In the 145/146 range it had over a 3:1 SWR. Not even close enough to mess with. And, we found the stock antenna coax was 75 ohm.

17194550472_c4bbb6f98d_k

This is the adapter dongle we made using the adapter cable. Simply cut off the stock antenna connector and put on a 239.

17008490208_06ac8374fc_k


Enough about what didn’t work. Let’s look at the radio head install.

For this, I like the gooseneck head mount my dad had in his Dodge. It kept the radio head low and out of sight (and out of the sun) while still easily accessible and easy to use. With the BlueCat dongle, I won’t need to fuss with the radio while I’m driving anyway – but more about that later.

16573650804_19a33770d2_k  17196209155_7337c14c8a_k

The gooseneck is a simple to mount item I got from Amazon: http://www.amazon.com/gp/product/B00FW5LTUI/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

You simply loosen one of your seat bolts and slip the mount in, then re-tighten the seat bolt. My seat bolt was mounted horizontal, so the gooseneck comes out forward then goes up, but it’s not in the way. Most seats should have a bolt that goes down into the floor which makes a slightly cleaner looking install.

17170215376_fa7ddf786c_k

I took the mount adapter off the top of the gooseneck thing, and modified the plastic corrugated tube to run the head cable in and out cleanly without chafing on the edge of the tube. I used little grommets to protect the cable.

17170279636_343a157953_k 16573778644_06538b0a16_k 17195636971_e201c33ecc_k

I like the way this looks with the short run of head cable coming out near the top of the gooseneck, while most of the cable is hidden inside the corrugated tube.

17017861278_73f5846462_k (1)16583155954_780520f1fe_k (1)


17195530561_56d53a8539_k16573670644_67f9d5aa23_k

For the radio, I knew I wanted to mount it under the passenger seat. The stock jack used to be there until it collapsed under the weight of the truck last year. I now have a bottle jack I keep in the back. Much safer and easier to use. The stock scissors jack was braced by a little spool looking button thinger that screwed into the floor.

Here is the hole left when you take the little spool looking button thinger out.

17008385668_c15f9de890_k

And here is what the little spool looking button thinger looks like in the radio bracket – and then screwed back into the floor. This makes for a successful, convenient, and no alteration radio mount. Worked out perfect.

17194478172_f86502df48_k 17008394408_5a63bfad73_k

Now with the radio:

17009999259_8012fecd57_k

Then with the Rigrunner:

17196158715_3f61c50ea8_k 17010035019_18a10def77_k

All this gets hidden behind the stock kickplate. Sorry, I don’t have a picture of that. The Rigrunner is attached securely with a couple cable ties through the carpet. Small holes that you’ll never see once it’s removed.

The power to the Rigrunner is run from the battery with a 20 amp fuse on each lead.

16576038723_4c06dd9c95_k17196154875_15d423a6ec_k

We routed the wires through a large boot already in the firewall. Poked a small hole with a screwdriver and fed the wires through. It is an unrecoverable alteration, but a minor one. For the Dodge Ram, there is a boot on the inside and a boot on the outside, so you’ll be going through two boots and have to be EXTREMELY careful to not nick or cut any other wires.

17194536632_2af81e0062_k

Finally, I wanted a power switch to turn the Rigrunner on and off. I mounted an LED lit switch in the dash. This is also an unrecoverable alteration, but a useful one. Who doesn’t need an extra switch for something? Right?!

17018050550_6a121680dc_k (1)


And that’s my install. Pretty clean.

Future projects include a permanent option for a 2m antenna, as well as a removable bed-stake mounted 20m for HF operation. Looking forward to that. I’ve had my General ticket for … well, a long time – and I’ve not yet used my HF privileges.

Many thanks to Larry Narikawa – N0OQA – for his expertise, advice, and assistance!


As for the BlueCat – that thing is amazing. It used the CAT port and gives you bluetooth accessibility to your radio. The guys who maintain the RepeaterBook have an app that works with the BlueCat. It uses your location and the repeater information in their database to present you a list of repeater options, starting with the closest. With the app running on your phone, you simply touch which repeater you want to use and it automatically sets the radio with offset, PL tone, etc. Everything you need. Amazing. I went down the list, setting each repeater into memory, and can now just scan the local repeaters.

Screenshot_2015-04-19-18-03-04

When I’m traveling, it updates based on my location. No matter where I’m at, I can see a list of the local repeaters and only have to touch the one I want to use on my phone. It instantly programs the radio.

Here is a link to more information about the software: http://www.zbm2.com/bluecat.html

Here is a link to the UK site where I bought the BlueCat: http://www.hamradio.co.uk/accessories-general-bluecat-radio-interface/adonis/bluecat-repeater-controller-for-yaesu-pd-4899.php


Overall, it was a successful install so far. Unfortunately, the repeaters here are mostly quiet. Not a lot of activity. Not like the Hawaii repeaters. You could always find someone on the Diamondhead repeater. I do miss that, but am finally trying to get involved in some radio activity here in Minnesota.

-wh7da