Archive for the ‘inverted V’ Tag

…almost there…

Inspired by the success I had on field day using some (most) of n0oqa’s gear, I’ve made some purchases to get my mobile-deploy-able setup going.

First, I decided to go with a hitch mount push-up mast. Using Larry’s setup really sold me on the Max-Gain Systems fiberglass mast. I ordered the MK-4 Standard from here: http://www.mgs4u.com/fiberglass-push-up-mast.htm

Also, after seeing what it really means to have a tuner “talking to” the radio, I purchased a Yaesu FC-40.

My plans are to setup the FC-40 with the ladder line and deploy-able antenna as well as the coax and CAT lines to the radio, then stage all that in the bed of the truck. I have a covered bed and will have everything staged in a waterproof bag.

This will leave the CAT port of the radio for my BlueCat device. Since I’m primarily on VHF when on the road, this will let me work repeaters easily wherever I’m at.

When I’m somewhere I can park to do some HF work, I’ll get the antenna base mounted in the receiver, put the antenna in, roll out the FC-40/antenna/coax unit, hook up the CAT line and the tuner coax, get the pulley staged on top the mast, push-up the mast, guy-rope the mast, pull up the feedpoint, straighten and anchor the ends of the antenna wires – and I’m on the air.

This will be an inverted V antenna.

If I get a couple fiberglass painter poles, I can guy-rope them at the ends and raise the wire ends a bit. Getting them off the ground even 5 feet will help tremendously since my antenna center will only be about 23 feet off the ground.

Thoughts?

Advice?

Advertisements